Swagelok® Gaugeable Tubing Fittings and Adapter Fittings

The live-loaded, two-ferrule tube fitting is easy to install, with no torque transmitted to tubing during installation. The Swagelok gap inspection gauge ensures sufficient pull-up upon initial installation.

Swagelok® Medium-Pressure, Gaugeable Tube Fittings and Adapter Fittings

The Swagelok medium-pressure tube fittings offer a leak-tight gas seal and vibration resistance in applications up to 15 000 psig (1034 bar).

Other Medium-Pressure Products

Swagelok® High-Pressure Fittings

High-pressure fittings are designed for pressures up to 60 000 psig (4134 bar), with both tube and pipe connections available.

Pipe Fittings and Gaugeable Mechanically Attached Pipe Fittings

Swagelok® stainless steel, brass, carbon steel pipe fittings are available in 1/16 to 1 in.sizes for a variety of applications. Swagelok also offers gaugeable alloy 400/R-405 mechanically attached pipe fittings that are ASTM F1387-qualified for shipboard use.

Swagelok® Weld Fittings

Swagelok offers weld fittings, in a variety of materials, sizes, and shapes to suit any industrial or high-purity application.

• Ultrahigh-purity, specially cleaned, and industrial
• SAF 2507™ super duplex
• Vacuum service
• Stainless steel tubular fittings

Biopharm Fittings, TS Series

Swagelok TS series biopharm fittings feature controlled gasket compression to prevent gasket extrusion and fluid holdup.

Features

• Meet ASME-BPE and 3-A sanitary standards
• Boreline seal and metal-to-metal stop virtually eliminate fluid holdup and improve drainability and cleanability.
• Seals remain leak-tight throughout pressure-temperature ratings range.
• Clamp and ferrule assemble easily as ferrule captures self-aligning gasket.
• TS series adapter gasket allows an existing ISO 2852 ferrule to mate with a TS series ferrule.

Cleaning

Ferrules are cleaned to ensure components are free of burrs, chips, loose particles, oil, grease, and other contaminants. Electropolished ferrules are passivated.

Options and Accessories

• Gaskets, adapter gaskets, wing nut tightening tool.

Swagelok® PFA Fittings—High-Purity Fine Thread Flare

Swagelok offers a range of PFA fitting shapes and sizes, including high-purity fine thread flare and tube fittings in straight, elbow, and tee configurations for use with 1/8 to 1 in. tubing.

Other Plastic Products

PFA tubing

PFA plug valves

PFA needle valves

UHP fluoropolymer diaphragm valves

UHP fluoropolymer check valves

PFA Fittings, Tube

Features

• Audible click ensures tubing is inserted properly.
• Visual indication of proper pull-up:
  • no gap between body hex and hex nut
  • hex flat alignment.
• Smooth, molded internal wetted surfaces reduce potential for system contamination.
• Grooved tubing allows for higher working pressure.
• Wrench make-up avoids the potentially unsafe practices of hand make-up and disassembly.

Accessories

• Groove cutters groove PFA tubing for use with Swagelok PFA tube fittings.
• A tube cutter for plastic tubing up to 1 in. outside diameter is available.

VCO® O-Ring Face Seal Fittings

Swagelok® VCO O-ring face seal fittings are designed for rapid assembly in pipe, tube, and welded systems. The “B” Type VCO fitting, for applications in biotechnology and pharmaceutics, uses an L-ring seal that eliminates concavity at the bore.

VCR® Metal Gasket Face Seal Fittings

VCR face seal fittings offer the high purity of a metal-to-metal seal, providing leak-tight service from vacuum to positive pressure. The seal on a VCR assembly is made when the gasket is compressed by two beads during the engagement of a male nut or body hex and a female nut.